VIZIO E260MV User Manual
10
www.VIZIO.com
Chapter 2 Basic Controls and Connections
Front Panel
POWER ‘VIZIO’ LIGHT—The VIZIO logo lights white
when powered on.
Your HDTV TV features touch-sensitive buttons that
light when active. The proximity sensor detects you,
and as your hand gets closer to the surface, the
intensity of the LEDs increase.
Remote Control Sensor—Point the remote control
directly at this window on the lower right corner of your
HDTV for the best response to the remote signal.
1. POWER (
)—Turn your HDTV on by pressing
the button once. Press the button again to turn your
HDTV off.
2. MENU—Press to launch the on-screen menu. If a
sub-menu is active, this button will proceed to the next
level.
3. CH
▲/▼—Press to change the channels up or
down. While the menu is active, these buttons function
as up and down controls.
4. VOL
▲/▼—Press to increase or decrease the
speaker volume. While the menu is active, these buttons function as left and right controls.
5. INPUT (SELECT)—Press to cycle through the various devices connected to your TV (called
Inputs). The inputs cycle in the following sequence: TV, AV (Composite), COMP (Component),
HDMI-1, HDMI-2, and RGB (VGA). After you have stepped through the entire sequence, you will
return to the beginning. If a sub-menu is active, pressing this button will return to the previous
menu level. Additionally, when the menu is active, this button confirms the menu function to be
adjusted.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
