Vizio E32-D1 Installation Guide

English - 7
Inserting and replacing batteries.
Two AAA batteries are included for you to use with
the basic remote control.
To insert/replace the batteries:
1. Find the notch on the back of the remote. Insert a
coin and pry open the back cover.
2. Remove the back cover and insert two AAA
batteries (included). Be sure to align the + and -
signs on the batteries and remote.
Visit http://support.vizio.com/ if you
have any questions.
1
2
When needed, VIZIO recommends
replacing the batteries that came with
this remote with two, new Duracell ‘AAA’
alkaline batteries.
WARNING: keep the remote control
batteries away from children. It may
cause choking and/or lead to a re or
chemical burn if mishandled. Do not
dispose of batteries in re. Replace only
with batteries of the correct type.

Vizio E32-D1 Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	120hz
Motion Enhancement	clear action 240
HDR	no
Built-In Speakers	yes
Surround Sound	dts studio sound
Speakers Output	5 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	no
Network	built-in wi-fi, ethernet
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	0
DVI	0
SmartTV	chromecast
Remote Control	ir
3D	no
Power Consumption	51 kilowatt hours
Depth with Stand	7.87 inches
Height with Stand	18.83 inches
Width with Stand	28.77 inches
Net Weight with Stand	11.68 pounds
Depth without Stand	2.99 inches
Height without Stand	16.96 inches
Net Weight without Stand	11.46 pounds