Vizio E32-D1 Installation Guide

English - 24
To mount your TV on a wall, you will need a wall
mount. Consult the information on this page to nd
the appropriate mount for your TV.
Be sure the mount you choose is capable of supporting
the weight of the TV. After you have determined that
you have the correct mount for your TV, you can
begin the installation.
Wall-mounting the TV
Installing a TV on a wall requires lifting. To
prevent injury or damage to the TV, ask
someone to help you.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, at, stable
surface. Be sure the surface is clear of debris that
can scratch or damage the TV.
3. Remove the stands by loosening and removing
the screws.
4. Attach your TV and wall mount to the wall,
carefully following the instructions that came with
your mount. Use only with a UL-listed wall mount
bracket rated for the weight/load of this TV.

Vizio E32-D1 Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	120hz
Motion Enhancement	clear action 240
HDR	no
Built-In Speakers	yes
Surround Sound	dts studio sound
Speakers Output	5 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	no
Network	built-in wi-fi, ethernet
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	0
DVI	0
SmartTV	chromecast
Remote Control	ir
3D	no
Power Consumption	51 kilowatt hours
Depth with Stand	7.87 inches
Height with Stand	18.83 inches
Width with Stand	28.77 inches
Net Weight with Stand	11.68 pounds
Depth without Stand	2.99 inches
Height without Stand	16.96 inches
Net Weight without Stand	11.46 pounds