3
43
To access the color calibration settings menu:
1. From the Picture menu, tap Color
Calibration. The Color Calibration
menu is displayed.
• Color Tuner settings allow you to adjust the HSB color and 11 point
• Calibration Tests allow you to display SMPTE, Flat, Ramp, and
Uniformity Analyzer test patterns.
Adjusting the Color Calibration Settings
gain, and 11 point white balance. You can also reset the color tuner values and
perform calibration tests.
Current Picture Mode
Current Color Temperature
Adjusting the Color Tuner Settings
To adjust the color tuner:
1. From the Color Calibration
menu, tap Color Tuner. The
Color Tuner menu is displayed.
2. Tap Color Tuner, the Color Tuner
submenu is displayed.
3. Adjust settings with switches by
swiping left to disable and right
to enable. Adjust settings with
decrease and right to increase.
To adjust the 11 point white balance:
1. From the Color Tuner menu, tap
11 Point White Balance. The
11 Point White Balance menu is
displayed.
2. Tap each setting and adjust
settings with sliders by sliding
decrease and
right to increase.
To Next Page
Loading...
