Vizio E32-D1 User Manual

3
63
1. From the Reset & Admin menu,
tap Set System PIN Code.
2. Use the on-screen number pad
to enter a PIN code. Tap SAVE to
continue.
3.      
again. Tap Submit when you are
   
appears, tap CLOSE.
You can use the TV’s Reset & Admin menu to set a System PIN, restore the TV to
its factory default settings, enable/disable Smart Interactivity, and enable/disable
the Store Demo.
Adjusting the Reset & Admin Settings
To set a system PIN code:
1. From the Reset & Admin menu,
tap Reset to Factory Settings.
2. 
tap YES to continue. Your TV
resets to the factory default
settings.
Note: If you set a System PIN,
then you will need to enter it
before the TV resets.
To reset the TV to its factory default settings:

Vizio E32-D1 Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	120hz
Motion Enhancement	clear action 240
HDR	no
Built-In Speakers	yes
Surround Sound	dts studio sound
Speakers Output	5 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	no
Network	built-in wi-fi, ethernet
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	0
DVI	0
SmartTV	chromecast
Remote Control	ir
3D	no
Power Consumption	51 kilowatt hours
Depth with Stand	7.87 inches
Height with Stand	18.83 inches
Width with Stand	28.77 inches
Net Weight with Stand	11.68 pounds
Depth without Stand	2.99 inches
Height without Stand	16.96 inches
Net Weight without Stand	11.46 pounds