Name: Vizio E48-D0
Brand: Vizio
Rating: 5 (1 reviews)

To Next Page

To Previous Page

To access the color calibration settings menu:

1. From the Picture menu, tap Color

Calibration. The Color Calibration

menu is displayed.

• Color Tuner settings allow you to adjust the HSB color and 11 point



• Calibration Tests allow you to display SMPTE, Flat, Ramp, and

Uniformity Analyzer test patterns.

Adjusting the Color Calibration Settings



gain, and 11 point white balance. You can also reset the color tuner values and

perform calibration tests.

Current Picture Mode

Current Color Temperature

Adjusting the Color Tuner Settings

To adjust the color tuner:

1. From the Color Calibration

menu, tap Color Tuner. The

Color Tuner menu is displayed.

2. Tap Color Tuner, the Color Tuner

submenu is displayed.

3. Adjust settings with switches by

swiping left to disable and right

to enable. Adjust settings with



decrease and right to increase.

To adjust the 11 point white balance:

1. From the Color Tuner menu, tap

11 Point White Balance. The

11 Point White Balance menu is

displayed.

2. Tap each setting and adjust

settings with sliders by sliding

decrease and

right to increase.

Questions and Answers:

Need help?

Do you have a question about the Vizio E48-D0 and is the answer not in the manual?

Vizio E48-D0 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	47.6 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Display number of colors	1.073 billion colors
Motion interpolation technology	-
3D	No
Battery type	AAA
Number of batteries supported	2
Processor cores	6
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
On Screen Display (OSD) languages	ENG, ESP, FRE
Audio decoders	DTS
RMS rated power	20 W
Sustainability certificates	ENERGY STAR
Power consumption (standby)	0.5 W
Power consumption (typical)	47 W
Product color	Black
Panel mounting interface	200 x 200 mm
Remote control type	XRT133
Package depth	143 mm
Package width	1180.08 mm
Package height	753.11 mm
Package weight	15082 g

Weight and Dimensions