Vizio E70-E3 - Page 46

3
46
To adjust the audio settings:
• Speakers (Display Speakers) -
Turns the built-in speakers on or
o. Select Auto to have the Display
automatically detect if there are
any devices (such as a sound bar)
connected to the Audio Out
output ports.
• Surround Sound - Surround sound
uses DTS TruSurround
™
to deliver
an immersive surround sound
experience from the Display’s
internal speakers. TruSurround
completes the entertainment
experience by providing deep, rich
bass and by delivering crisp details
and clear, intelligible dialog. Swipe
the switch left to disable and right
to enable.
• Volume Leveling - Volume leveling
uses DTS TruVolume
™
to maintain
consistent volume levels during
transitions between program
content, AV formats, and input
sources. Swipe the switch left to
disable and right to enable. In a few
cases, volume leveling may articially
suppress volume increases, making
it dicult to hear dialog or attening
sudden noises. If this occurs, turn
volume leveling o.
• Balance - Adjusts the loudness of the audio output from the left and
right speakers.
• Lip Sync - Adjusts the synchronization between the Display image and the
accompanying audio track.
• Digital Audio Out - Changes the type of processing for digital audio out
and HDMI ARC output when connected to a home theater audio system.
Select PCM or Bitstream.
• Analog Audio Out - Sets the volume control properties for the RCA
connector when connected to a home theater audio system. Select Variable
if you are controlling the volume with the Display’s volume controls, or
select Fixed if an external audio device (sound bar or AV receiver) will control
the volume.