4
Connecting to a Hidden Network
To connect to a wireless network whose network name (SSID) is
not being broadcast:
1. From the NETWORK menu,
highlight Hidden Network
and press OK. The ENTER
ACCESS POINT NAME screen is
displayed.
2. Using the keyboard on the
remote, enter your network’s
name (SSID), then highlight
Connect and press OK.
3. Using the keyboard on the
remote, enter your network’s
password, then highlight
Connect and press OK.
4. Press the EXIT button on the
remote.
ENTER ACCESS POINT NAME
Enter your access point name. This
is used to connect to an access
point with a hidden SSID.
a b c d e f g h i
j k l m n o p q r
s t u v w x y z 0
1 2 3 4 5 6 7 8 9
.@# .com Space
Connect
Testing Your Network Connection
To test your network connection:
1. From the NETWORK menu, highlight Test Connection and
press OK.
2. The TEST CONNECTION screen displays the connection
method, network name, signal strength, and download
speed of your network connection.
3. Press the EXIT button on the remote.
äêí
35
To Next Page
Loading...
Need help?
General
