Function LED Behavior Description
DTS
TruSurround
On/O
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On),
all inputs will produce virtual surround sound. When disabled (O), all sources will
playback in stereo.
Treble
Levels
Press the TREBLE button then press the Next/Previous button to increase/decrease
the treble level. The LED indicators will move up with increasing levels and down with
decreasing levels.
Bass
Levels
Press the BASS button then press the Next/Previous button to increase/decrease
the bass level. The LED indicators will move up with increasing levels and down with
decreasing levels.
Two center LEDs indicate
Treble level 0.
Two center LEDs indicate
Bass level 0.
LED Indicators are located here.
To Next Page
Loading...
Need help?
General
