LED Indicators are located here.
The LED Indicators will behave dierently with each button on the remote control.
Function LED Behavior Description
Input
Press the INPUT button on the remote to cycle through the available inputs:
• Analog Audio In - AUX Stereo RCA (1)
• Analog Audio In - AUX Stereo 3.5mm (2)
• Coaxial In - Digital (3)
• Digital Optical Audio In - Optical (4)
• Bluetooth
• USB In - USB (6)
Bluetooth
Pairing
Press and hold the button on the remote. The Sound Bar will be discoverable for 15
minutes. You can now search for the Sound Bar (VIZIO SB2920) using your Bluetooth
Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
DTS
TruVolume
On/O
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable volume level
for a more enjoyable listening experience.
(When searching for device)
Flash from Left to Right
and back continuously.
TruVolume On
TruVolume O
Analog Audio In - AUX (1)
Analog Audio In - AUX (2)
Coaxial In - Digital (3)
Digital Optical Audio In
Optical (4)
Bluetooth
USB In - USB (6)
To Next Page
Loading...
Need help?
General
