ENG - 13
Mode & Level Settings
The LED indicators will behave differently with each function.
LED Indicators are located here.
Function LED Behavior Description
Input
The LED indicator
color will change per
specic input.
Press the INPUT button to cycle through the available inputs. Press and hold the INPUT
button on the remote control for 4 seconds to enable the auto input detect function.
Specic inputs will show a dierent LED color:
• AUX In: Green
• AUX VA: Violet
• Digital Optical: Red
• HDMI (ARC): Magenta
• Bluetooth: Blue
• USB: Orange
Bluetooth
When searching for
device: ash from
bottom to top and back
continuously
Press and hold the
button on the remote. The sound bar will be discoverable for 15
minutes. You can now search for the sound bar (VIZIO V21x) using your Bluetooth Device.
The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar
DTS TruVolume
TruVolume On
Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume
provides a consistent and comfortable volume level for a more enjoyable listening
experience.
TruVolume O
DTS Virtual:X
Virtual:X On
Press the VRT:X button to enable/disable Virtual:X. When enabled (On), all inputs will
produce a virtual sound technology that simulates the eect of having overhead sound.
When disabled (O), all sources will playback in stereo.
Virtual:X O
Equalizer Mode
Press the EQ button to toggle between preset equalizer settings: Movie, Music, Dialogue,
and Game.
Note: Movie mode is on by default.
Game
Dialogue
Music
Movie
To Next Page
Loading...
Need help?
General
Weight and Dimensions
