ViziT KTM600F - Parts List; Safety Instructions

FEATURES
·
·
·
·
·
·
·
·
Entrance door unlocking ACCESS keys
Entrance door unlocking by pressing the indoor EXIT button
Guard mode can be enabled disabled with a GUARD
or MASTER key All ACCESS keys are disabled in this mode
Programmable unlocked state duration
Light sound indication of operating modes
MASTER key memorizing
GUARD ACCESS keys memorizing and erasing
All data erasing
with (up to 2680 keys)
or key (up to 28 keys)
the - (1 key).
1 s or 7 s
and
-
and
PARTS LIST
SAFETY INSTRUCTIONS
2The product does not contain voltage above
Do not make any connections or repair when the power is on
Take care not to spill any liquids or chemically active substances on the product. Switch the power off before cleaning the
product. Clean by wiping with dry soft cloth. Do not use any liquid cleaners, aerosol cleaners or abrasive agents
.
.
.
8 VDC
Operating Instruction
x1
x1x1
CUontrol nit KTM600M Reader RD-4F
Fasteners
Screw - 4x40
Anchor - 6х40
for Control nitU KTM600M
x2 x2
for Reader RD-4F
Screw 4 4-х0
x2 x2
Gag
x 4
Anchor 4- 6х 0
www. 5VIZIT-KTM600F Operating Instruction (revision 10)vizit-group.com 2 11/201 -