Why does no water come out when spraying my VMAI V8 Pro?
If no water comes out when spraying with your VMAI Ultrasonic Jewelry Cleaner, the clean water tank might be empty. Please fill it up. Also, ensure the clean water tank is properly installed; reinstall it if necessary.
Why does my VMAI Ultrasonic Jewelry Cleaner always say 'Empty the water tank'?
If your VMAI Ultrasonic Jewelry Cleaner always displays the 'Empty the water tank' alarm, the HEPA filter might be blocked. Please clean the HEPA filter. Alternatively, the dirty water tank could be full, so empty it.
Diagram showing the front view of the cleaner with labeled parts.
Diagram showing the back view of the cleaner with labeled parts.
Diagram of the clean water tank with labeled components.
Diagram of the brush base with labeled parts.
Diagram of the charging station with labeled parts.
Explains indicators for Eco/Max modes and working time.
Indicates low clean water or full dirty water tank.
Shows self-cleaning mode and remaining battery capacity.
Instructions for charging the cleaner and its battery pack.
Steps for using the cleaner to clean floors.
Details on using switch, max mode, spray button, and priming.
Guidance on handle tilt, cleaning motion, and rug warnings.
Instructions for cleaning the dirty water tank after use.
Steps to perform automatic self-cleaning of the roller brush and pipeline.
Guidance on wiping the main body, station, and brush base.
Instructions for removing and cleaning the roller brush.
Steps for emptying and cleaning the dirty water tank and HEPA filter.
Instructions for cleaning the charging station and drying tray.
Guidance on drying and storing machine parts and battery pack.
Information on how to get assistance or report problems.
General| Brand | VMAI |
|---|---|
| Model | V8 Pro |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
To Next Page