To Next PageTo Next Page
Need help?Do you have a question about the vogel's THIN 445 and is the answer not in the manual?
General| Mounting type | Wall |
|---|---|
| Maximum VESA mount | 400 x 400 mm |
| Minimum VESA mount | 100 x 100 mm |
| Maximum screen size | 55 \ |
| Minimum screen size | 26 \ |
| Maximum weight capacity | 18 kg |
| Panel mounting interface | 100 x 100, 100 x 200, 200 x 100, 200 x 200, 200 x 300, 200 x 400, 300 x 100, 300 x 200, 300 x 400, 300 x 300, 400 x 200, 400 x 400, 400 x 300 mm |
| Number of displays supported | 1 |
| Swivel angle | 180 ° |
| Tilt angle range | 0 - 20 ° |
| Built-in spirit level | Yes |
| Number of pivot points | 3 |
| Distance to the wall (max) | 508 mm |
| Distance to the wall (min) | 35 mm |
| Product color | White |
| Package type | Box |
| Harmonized System (HS) code | 85299097 |
Weight and Dimensions| Width | 509 mm |
|---|---|
| Height | 348 mm |
Loosen upper and remove lower thumbscrews for TV removal.
Attach the TV to the wall mount by hooking it on.
Ensure the TV is positioned horizontally and level.
Reinsert and tighten both thumbscrews after positioning the TV.
Remove the bottom cover of the wall mount for cable access.
Route the cables through the designated conduit.
Reattach the cover by pushing until it clicks into place.
Attach the cable clip to the lower bar.
