To Next PageTo Next Page
Need help?Do you have a question about the vogel's THIN 415 and is the answer not in the manual?
General| Type | Wall Mount |
|---|---|
| Product Type | TV wall mount |
| VESA compatibility | Yes |
| Tilt | Yes |
| Color | Black |
| Material | Steel |
| Mounting Type | Wall |
| Max TV size | 55 in |
| VESA mounting interfaces | 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 mm |
| Tilt Range | Up to 15° |
| Included Components | Wall mount, mounting hardware |
Read all warnings before mounting the wall mount and supplied parts list.
Step 1: Extend and unfold the tilt system mechanism for the TV mount.
Step 2.1: Attach the lower part of the mounting strips (C) securely to the back of the TV.
Adjust the length of the mounting strips to match the TV's VESA hole pattern, not exceeding 'MAX'.
Step 2.2: Attach the upper part of the mounting strips (C) securely to the back of the TV.
Step 3: Drill the center hole and screw the wall mount (A) onto the wall, tightening all bolts (N).
Step 4: Position the wall mount (A) level, drill left/right holes, and tighten three bolts (N).
Step 5: Hang the TV onto the wall mount (A), adjusting level for 100 mm VESA width.
Step 6: Adjust the TV to your desired viewing angle or position.
Step 7: Safely detach the TV from the wall mount (A).
