To Next PageTo Next Page
Need help?Do you have a question about the vogel's THIN 550 and is the answer not in the manual?
General| Mounting type | Wall |
|---|---|
| Maximum VESA mount | 600 x 400 mm |
| Minimum VESA mount | 100 x 100 mm |
| Maximum screen size | 100 \ |
| Minimum screen size | 40 \ |
| Maximum weight capacity | 70 kg |
| Panel mounting interface | 100 x 100, 100 x 200, 200 x 200, 200 x 100, 200 x 300, 200 x 400, 300 x 100, 300 x 200, 300 x 300, 300 x 400, 400 x 100, 400 x 400, 400 x 200, 400 x 300, 400 x 500, 500 x 100, 500 x 200, 500 x 300, 500 x 400, 600 x 200, 600 x 400 mm |
| Number of displays supported | 1 |
| Screws included | Yes |
| Turn angle | 120 ° |
| Tilt angle range | 0 - 20 ° |
| Distance to the wall (max) | 630 mm |
| Distance to the wall (min) | 58 mm |
| Product color | Black |
| Harmonized System (HS) code | 85299097 |
Secure the mounting strips onto the back of the television screen as per instructions.
Remove protective caps from the bars and slide them onto the attached TV strips.
Tighten the bolts connecting the bars and reattach the protective caps.
Use the provided drilling template to mark and drill holes accurately on the wall.
Securely attach the main wall mount bracket to the wall using appropriate hardware.
Fit the decorative cover onto the wall mount bracket for a finished look.
Loosen the upper nut and remove the lower nut before hanging the TV.
Carefully hang the television onto the wall mount bracket, engaging the upper nut.
Adjust the TV to the desired level and tighten both nuts to secure it in place.
Route cables through the conduit and securely click the cover into position.
Slide the cable clip onto the lower bar and thread the cables through it.
Tilt the television to your preferred viewing angle and finalize its position.
Loosen nuts, remove the lower nut, and detach the television from the wall mount.
