Need help?Do you have a question about the Void Bias VQ and is the answer not in the manual?
General| Frequency Response | 20Hz - 20kHz (±0.5dB) |
|---|---|
| Input Impedance | 47k Ohms |
| Signal-to-Noise Ratio | >90dB |
| Total Harmonic Distortion | <0.1% |
| Inputs | RCA, XLR |
| Outputs | Speaker binding posts |
Details pinout configurations for analog input connectors like XLR and TRS.
Illustrates speakON wiring for loudspeakers and output connector pinouts.
Explains graphical symbols and lists essential safety rules and precautions for operating the amplifier.
Welcomes the user and provides an overview of the Bias Series amplifiers' design and features.
Guides on inspecting the product upon arrival and the environmentally friendly disposal of packaging materials.
Details the amplifier's cooling system, ventilation requirements, and thermal protection mechanisms.
Provides instructions on how to clean the amplifier chassis and air filters.
Covers AC power connection, voltage requirements, and critical safety precautions for installation.
Explains signal grounding, balanced inputs, and analog input connectors.
Details line output, hazardous loudspeaker terminals, and speakON connections.
Covers Ethernet connection for remote control and auxiliary voltage for DSP management.
Covers product warranty terms, exclusions, and the procedure for returning goods with RMA.
Details the policy for repair/replacement, and clarifies responsibilities for shipping costs.
Provides information on obtaining technical support, authorized service centers, and the repair process.
Details the number of channels, input/output connectors, and output power ratings.
Covers gain, input sensitivity, frequency response, crosstalk, S/N ratio, and THD+N.
Specifies power supply voltage, power factor, and consumption details.
Details DSP architecture, AD/DA converters, latency, and operating temperature.
Provides dimensions, weight, and networking interface specifications.
To Next Page
