Volansys CENTAURI-200 - Factory Reset the Gateway; Figure 4- 5 Gateway Property Change; Figure 4- 6 Gateway Wi-Fi Reset Button

CENTAURI-200 User Guide
VT-ENG-TMP-UG | Rev 1.1 | 31-Jul-19
Volansys-Confidential Page
18
of
21
Figure 4- 5 Gateway property change
3.4.2 Factory reset the gateway
1. SW2 switch can be used (long press) to factory reset the gateway if needed. Refer Gateway
Switch indication for more details
Figure 4- 6 Gateway Wi-Fi reset button
o
User can see LED2 will turn green if Gateway has internet connectivity.
o
LED2 will be red if there is not internet connectivity