TABLE OF CONTENTS
1. INTRODUCTION
1.1 Precautions, requirements, recommendations
1.2 Transport
1.3 Initial steps taken before instalation
2. DESIGN, USE, PRINCIPLE OF OPERATION
2.1 Intended use
2.2 Principle of operation
2.3 Construction of the device
2.4 Overall dimensions
3. TECHNICAL DATA
4. INSTALLATION
4.1 Installation with a bracket
4.2 Installation instructions
5. AUTOMATIC DEVICES
5.1 Automatic devices
6. START-UP, OPERATION, MAINTENANCE
6.1 Start-up
6.2 Operation and maintenance
7. OCCUPATIONAL HEALTH AND SAFETY
INSTRUCTIONS
8. TECHNICAL INFORMATION TO THE REGULATION
(EU) NO 327/2011 IMPLEMENTING DIRECTIVE
2009/125/EC
9. SERVICE
9.1 Procedures in case of defects
9.2 Complaint procedure
9.3 Spare parts list
PL
25
EN
To Next Page
Loading...