4
3. SMARTCRYSTAL
TM
CINEMA HORIzONTAL fEATURES
3.1 - General specications
- Aluminum mechanical-housing material
- Surface-Switching Technology™ for crisp and bright 3D images
- Upgradable software for optimal 3D performance
- Meets all standards for electronics approved by CE
- Approved by Hollywood Studios
- 3-year warranty
- For use with lightweight circular-polarized passive 3D glasses
- Passive 3D glasses as well as clip-on 3D glasses are available from Volfoni. Please contact us for more details.
3.2 - Technical specications
- Maximum power of projector: 7 kW
- Maximum switching speed: 192/240Hz
- Optical light efciency: > 18% (with Volfoni Premium 3D glasses)
- Power supply: 110V/240V 50/60Hz
- Operating temperature: +10°C to +50°C (50°F to 122°F)
- Storage temperature: -5°C to+50°C (23°F to 122°F)
- Polarization window dimension: 171 x 116mm (6.7 x 4.5 in)
- Product dimensions (L x W x H): 302 x 228 x 75mm (11.8 x 8.9 x 2.9 in)
- Weight: 6kg (13.2lbs)
3.3 - Electrical specications
- V= 240 / 110 V AC
- F = 50 / 60 Hz
- P = 35 W
- The unit has a built-in surge protector
- The system is supplied with two different power cables, a European model and an American model.
- This equipment should be electrically grounded.
- The electrical circuit will detect any voltage spikes generated in the system and the system will be shut-down should this occur. Thereafter, it will be necessary
to re-start the system once the fault has been rectied.
- In case of malfunction, one of the LED indicators on the control board will light up and the system will be shut-down. Then, the fault should be rectied before
re-starting the system.
- To rectify any indicated faults, please contact your dealer, installer stating the model number shown in the silver label of the product.
3.4 - Projector settings
To use the SmartCrystal™ Cinema Horizontal, the 3D projector should be set as below:
- Dark Time : 1200 μs
- Delay : 0
To Next Page
Loading...