What to do if the Volfoni Projector Accessories system does not work?
If the Volfoni Projector Accessories system isn't working, check the Power LED. If it's off, make sure the SmartCrystal™ Cinema Horizontal electronic module is correctly mounted in the bracket. Also, verify the power supply is connected and the system is powered on. If the problem continues, contact technical support.
Why is the SYNC LED not illuminating on my Volfoni Projector Accessories?
If the SYNC LED isn't lighting up on your Volfoni Projector Accessories, ensure the sync cable is properly connected to the SmartCrystal™ Cinema Horizontal Polarizer Module.
What does a red continuous light on the Sync LED of Volfoni Smart Crystal mean?
A continuous red light on the Sync LED indicates that the system is powered but isn't receiving a synchronization signal. Ensure the 3D mode is selected in the setup of your 3D source.
What to do if the LED flashes correctly but no 3D images are shown on Volfoni Projector Accessories?
If the LED is flashing correctly but you're not seeing 3D images with your Volfoni Projector Accessories, check that the SmartCrystal™ Cinema Horizontal is correctly oriented with the PROJECTOR SIDE facing the projector. Also, confirm that you're using a 3D-compliant screen (silver screen with gain 2,4), the content is in 3D, and the projector is running in 3D mode.
What does it mean if the 'state motor' LED illuminates in red on Volfoni Smart Crystal Projector Accessories?
In such case, please contact directly your technical support. Do not touch the electronics of the SmartCrystal™ Cinema Horizontal.
General| Brand | Volfoni |
|---|---|
| Model | Smart Crystal |
| Category | Projector Accessories |
| Language | English |
Details general specifications of the SmartCrystal™ Cinema Horizontal, including materials and certifications.
Provides key technical parameters like power, speed, efficiency, temperature, and dimensions.
Outlines electrical requirements, power supply, and safety features like surge protection.
Specifies recommended settings for the 3D projector when using the SmartCrystal™ Cinema Horizontal.
Explains the physical layout and components of the SmartCrystal™ Cinema Horizontal's user interface.
Covers powering the unit ON/OFF and switching between 2D and 3D display modes.
Details the RJ45 connector for network connection and remote operations.
Describes how to update the SmartCrystal™ Cinema Horizontal software via USB.
To Next Page