WARNING
Engine oil can ignite if it comes in contact with hot en-
gine components. This may cause fire, burns and other
serious injuries.
â—† Always make sure that the cap of the engine filler
opening is securely closed after refilling. This will
prevent the engine oil from draining out on to hot en-
gine components when the engine is running.
Note
â—† Do not start the engine if the engine oil level is above seg-
ment -A-. Seek expert assistance. The catalytic converter
and the engine could otherwise be damaged.
â—† When refilling or changing service fluids, make sure that the
contents of the containers are correct. Incorrect service flu-
ids can cause serious functional problems and damage to
the engine.
â—† The engine oil level must never be above segment -A-. Oth-
erwise, engine oil could be drawn in through the crankcase
breather and escape into the atmosphere via the exhaust
system.
2 Parts of lubrication system
Caution
Finding metal shavings or a large quantity of small metal
particles during engine repair could indicate that the crank-
shaft bearings or conrod bearings are damaged. To prevent
this from causing further damage, perform the following re-
pairs:
Thoroughly clean oil passages,
Renew oil spray jets,
Renew oil cooler,
Renew oil filter element.
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
3
2 Parts of lubrication system
249
To Next Page
Loading...
Need help?
General
