EasyManua.ls Logo

VOLTAG Fold - Charging Your Bike; Charging Your Battery

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
14
Fold series
www.ridevoltag.com
Charging your bike
Note: please stop charging when the temperature of battery is more than 40°C .
The red indicator light on the charger will light up when the bike is charging.
Average charging time: 5-6 hours, depending on the ambient temperature.
The charger has over-current protection. Charging up to 18 hours will not affect the life of battery
and the charger. Do not leave the battery plugged in for more than 18 hours.
Low battery ÀDVK
Charging Your Battery
2. Insert the plug of the charger into an electrical wall outlet rated at 110V/120V.
Fully charge your battery before your ¿UVt ride and after any operation, especially after long
distance riding.
1. Power off the bike at the side of display to make sure charging safely.
The battery indicator has 4 segments, each segment represents 25% of the battery capacity. If the
battery is fully charged all 4 segments will be shown as full. If the battery capacity is low the battery
indicator will flash. Indicating that the battery needs to be charged immediately.
3. Plug the charging adapter into the charging port found under the seat.
4. The indicator light of the bike charger will turn RED which means it is charging. Once the battery is
completely charged, the status light will change to GREEN.
Note:
Do not use the bike while charging.
(1)
(3)
(2)
(4)

Related product manuals