Why does my VOLTCRAFT Thermometer show incorrect measurements?
An incorrect measurement display on your VOLTCRAFT Thermometer might be due to several factors. Check the following: * Ensure the correct emission level is set. * Verify the lens is clean. * Confirm the measuring surface is not covered by glass. * Make sure the operating temperature is within the permissible range.
What to do if my VOLTCRAFT Thermometer displays incorrect measurements?
If your VOLTCRAFT Thermometer shows an incorrect measurement, several factors could be responsible. First, verify that the correct emission level is set; if not, change it. A dirty lens can also cause inaccuracies, so ensure the lens is clean. Additionally, remove any glass pane covering the measuring surface. Finally, make sure the device is operating within its permissible temperature range, as exceeding or falling below this range can affect readings.
General| Product type | Infrared Thermometer |
|---|---|
| Temperature (min.) | -50 °C |
| Optical resolution | 12:1 |
| Response time | 500 ms |
| Power supply | 9 V battery |
| Weight | 290 g |
| Resolution | 0.1°C |
| Probe Type | Infrared |
| Emissivity | 0.1 - 1.0 adjustable |
| Spectral sensitivity | 8 - 14 μm |
| Accuracy | ±1.5 % or ±1.5 °C |
To Next Page