VOLTCRAFT DT-30LK - Intended Use

3. Intended use
The product is designed to measure and display rotation speed and belt speed. Measurements
are either non-contact via the built-in laser or per direct contact using the included adapters.
The measured values are shown on the 5-digit LC display. The product features a memory with
space for 40 measured values which allows the user to retrieve the maximum, minimum and
average values from a stored measuring procedure.
Power supply is via a 9 V block battery.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product other than for its intended purpose as described above can damage the product or pose
ariskofinjury.Readtheinstructionscarefullyandstoretheminasafeplace.Makethisproduct
available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
4. Delivery content
• Tachometer
• 3x contact adapters
• Adapter holder
• Extension attachment
• 9 V block battery
• 3x20cmreectivestripes
• Carry case
• Operating instructions
1Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads
orscantheQRcodeshown.Followtheinstructionsonthewebsite.
20