VOLTCRAFT PPS 11360 User Manual

49
12. CONTROL WITH THE PC SOFTWARE
Open the HCS software by clicking its icon in the start menu under “Program les > HCS”. The control
command from the software will override the physical control of the power supply.
Turn on and connect the product before starting the program.
Operating elements of the software and the basic operation
1
2 3
4 5
6
7
8
9
1011
12
13
14
15
16
17
19
18
20
1. Description A text eld for you to put some description in.
2. Voltage The eld where you can program the voltage to the power supply. After
inputting the value, press the enter key on the keyboard or click on the enter
symbol (3) to set the power supply.
3. Enter symbol Click to set the output voltage of the power supply according to the input in
the voltage eld (2).
4. Current The eld where you can program the current to the power supply. After inputting
the value, press the enter key on the keyboard or click on the enter symbol (5)
to set the power supply.
5. Enter symbol Click to set the output current of the power supply according to the input in
the voltage eld (4).

VOLTCRAFT PPS 11360 Specifications

General

Brand	VOLTCRAFT
Model	PPS 11360
Category	Power Supply
Language	English