What to do if the C.C. indicator is lit on my VOLTCRAFT Power Supply?
If the control indicator C.C. is lit, it means the preset current was exceeded. You should check the power consumption of your consumer and increase the current limitation on your power unit, if applicable.
What does 'O P OFF' mean on my VOLTCRAFT Power Supply?
The “O P OFF” display means that the DC output was switched off through the remote control terminal Remote Control or software.
How to disable rear control on VOLTCRAFT DPPS-16-30 Power Supply?
The control indicator REAR CONTROL is lit because remote control operation is active. To resolve this, put the rear MODE slider into the Normal position.
What to do if connected devices don't work with VOLTCRAFT DPPS-16-30 Power Supply?
Check the technical data of the consumers, ensure the voltage is set correctly, and verify the polarity is correct.
What does the C.V. LED indicate on my VOLTCRAFT DPPS-16-30 Power Supply?
If the control indicator C.V. LED is lit, it means the power unit is working normally and the output provides the constant voltage set.
How to troubleshoot a VOLTCRAFT Power Supply that won't turn on?
Check the mains voltage and the mains fuse in the device or the line circuit breaker.
General| Brand | VOLTCRAFT |
|---|---|
| Model | DPPS-16-30 |
| Category | Power Supply |
| Language | English |
To Next Page
