Voltronic Power Axpert Plus Duo User Manual

INVERTER/CHARGER
5KVA with MPPT solar charger
Version: 1.0
User Manual

Voltronic Power Axpert Plus Duo Specifications

General

Brand	Voltronic Power
Model	Axpert Plus Duo
Category	Inverter
Language	English

Summary

About This Manual

Purpose

Describes the manual's scope and intent.

Scope

Outlines the content covered in the manual.

Introduction

Key Features

Lists the main functionalities and capabilities of the inverter.

System Architecture

Explains the basic setup of the inverter with connected components.

Product Overview

Single Model Layout

Details the physical components and ports of a single unit.

Parallel Model Layout

Details the physical components and ports for parallel units.

Installation

Unpacking and Inspection

Steps for checking package contents and unit integrity.

Preparation

Pre-installation steps before connecting any wiring.

Mounting the Unit

Guidelines for physically installing the inverter safely and correctly.

Battery Connection

Instructions for connecting the battery bank to the inverter.

AC Input/Output Connection

Procedures for connecting AC power sources and loads.

PV Connection

Steps for connecting solar PV modules to the inverter.

Final Assembly

Completing the physical installation after wiring.

Communication Connection

Connecting the unit for monitoring and control via PC.

Dry Contact Signal

Explains the functionality of the dry contact output port.

Operation

Power ON/OFF

Basic procedure to turn the unit on and off using the switch.

Operation and Display Panel

Overview of the front panel interface, indicators, and keys.

LCD Display Icons

Explanation of various symbols shown on the LCD screen.

Load Information

Understanding load indicators and percentage levels.

Operating Mode Information

Description of different operational states like AC mode, battery mode.

Mute Operation

How to disable unit alarms or beeps.

LCD Setting

Configuring inverter parameters and settings via the LCD menu.

Display Setting

Customizing the information displayed on the LCD screen.

Operating Mode Description

Detailed explanation of each operating mode like Line, Battery, Fault.

Specifications

Line Mode Specifications

Technical specifications for the utility bypass mode.

Inverter Mode Specifications

Technical specifications for the inverter operating mode.

Charge Mode Specifications

Technical specifications for utility and solar charging modes.

General Specifications

Overall specifications including temperature, dimensions, and certifications.

Troubleshooting

Fault Reference Codes

List of fault codes and their corresponding events and icons.

Warning Indicator

Explanation of warning indicators, audible alarms, and flashing icons.

Appendix I: Backup Time Table

Parallel Function

Introduction

Overview of parallel operation capabilities and modes.

Package Contents

Lists the items included in the parallel operation kit.

Parallel Board Installation

Step-by-step guide for installing the parallel communication board.

Unit Mounting

Guidelines for mounting multiple units in parallel.

Wiring Connection

Procedures for connecting power and communication cables for parallel units.

AC Input Breaker Specs

Recommended breaker ratings for AC input in parallel configurations.

Battery Capacity Recommendations

Suggested battery sizes for parallel setups.

Single Phase Parallel Operation

Details on connecting units for single-phase parallel output.

Three Phase Equipment Support

How to connect units to support three-phase loads.

PV Connection

Connecting solar PV modules in parallel configurations.

Parallel LCD Settings

Configuring inverter settings specific to parallel operation.

Commissioning

Steps to enable and verify parallel operation setup.

Single Phase Commissioning

Commissioning procedure for single-phase parallel systems.

Three Phase Commissioning

Commissioning procedure for three-phase parallel systems.

Parallel Troubleshooting

Solutions for common fault codes and issues in parallel operation.