Need help?Do you have a question about the Voltronic Power Axpert MEX-1500 and is the answer not in the manual?
Overview of the manual's purpose and scope for basic maintenance.
Essential safety guidelines and precautions for handling the inverter/charger.
Details how the switch power supply converts battery voltage to DC power for operation.
Explains the full bridge topology used for DC-DC conversion.
Describes the full-bridge inverter circuit and its PWM output mechanism.
Explains the charger's operation for maintaining battery charge levels.
Overview of the main board's integrated power supply, converter, and inverter circuits.
Details the CNTL board's role in signal detection and DSP-based logic control.
Explains the SCC board's MPPT control for solar charging.
Information on the communication port for PC connectivity.
Describes the function of LED indicators and control keys on the interface.
Guide to interpreting the status and behavior of LED indicators.
Explains the meaning and function of various icons shown on the LCD screen.
Lists fault codes, associated events, and their display icons.
Details warning codes, audible alerts, and visual indicators.
Step-by-step solutions for problems indicated by system feedback.
Recommended first checks for common operational problems.
Detailed electrical parameters for utility bypass operation.
Key electrical specifications during inverter mode operation.
Specifications for charging the battery from a utility power source.
Specifications for solar charging using Maximum Power Point Tracking.
General| Output Voltage | 230 VAC ± 5% |
|---|---|
| Battery Voltage | 24 VDC |
| DC Input Voltage | 24 VDC |
| Surge Power | 3000VA |
| Waveform | Pure sine wave |
| Transfer Time | 10 ms (Typical) |
| USB Port | Yes |
| Model | Axpert MEX 1500 |
| Rated Power | 1500VA |
| Output Frequency | 50 Hz / 60 Hz (Auto sensing) |
| Battery Type | Gel, Flooded, Lithium |
To Next Page
