To Next Page
Y
ymorrisSep 23, 2025
What to do for OP voltage fault on Voltronic Power 10KW Inverter?
- MMark AndersonSep 23, 2025
Don’t connect the grid to the output terminal.
What to do for OP voltage fault on Voltronic Power 10KW Inverter?
Don’t connect the grid to the output terminal.
How to fix over temperature on Voltronic Power Inverter?
If your Voltronic Power Inverter displays an over temperature error, it means the internal temperature is too high. First, check the ambient temperature and the fans. If the error persists, please contact your installer.
What to do if Voltronic Power 10KW Inverter has GFCI fault?
If your Voltronic Power Inverter is showing a GFCI fault, it indicates that the leakage current exceeds the limit. Check the wiring and panels for any potential leakage. If the problem continues, please contact your installer.
What to do if Voltronic Power 10KW Inverter shows bus voltage over?
If your Voltronic Power Inverter displays a 'Bus voltage over' error, it could be due to a surge. Try restarting the inverter. If the error persists, please contact your installer.
What to do if Voltronic Power Inverter shows solar over current?
If your Voltronic Power Inverter displays a solar over current error, it could be due to a surge. Try restarting the inverter. If the error persists, please contact your installer.
What does wire connection fault mean on Voltronic Power Inverter?
If your Voltronic Power Inverter displays a 'Wire connection fault', it indicates that internal wires are loose. Please contact your installer.
What does CT sensor fault mean on Voltronic Power Inverter?
If your Voltronic Power Inverter displays a 'CT sensor fault' error, it indicates that internal components have failed. Please contact your installer.
What does fan lock mean on Voltronic Power 10KW Inverter?
If your Voltronic Power Inverter displays a 'Fan lock' error, it means the fan has failed. Please contact your installer.
What to do if Voltronic Power 10KW displays INV short?
If your Voltronic Power Inverter displays an INV short error, the output is likely short-circuited. Check if the wiring is properly connected and remove any abnormal loads.
What to do if Voltronic Power 10KW displays battery high voltage fault?
If your Voltronic Power Inverter displays a 'Battery high voltage fault', it means the battery voltage exceeds the limit. Check the battery voltage. If the error persists, please contact your installer.
Provides general precautions and warnings related to inverter operation and safety.
Provides guidelines for choosing an appropriate and safe location for inverter installation.
Details the process and safety precautions for securely mounting the inverter.
Outlines essential preparation steps and cable requirements for connecting to the grid.
Step-by-step guide for making the physical connection to the AC utility power source.
Verifies PV array voltage and current against inverter specifications before connection.
Ensures correct polarity of PV cables and final connection to inverter terminals.
Verifies the nominal battery voltage to ensure compatibility with the inverter.
Guides the user on connecting battery cables to the correct terminals, observing polarity.
Outlines preparation steps and cable requirements for connecting the load to the inverter.
Step-by-step guide for connecting the load socket to the inverter's AC output terminals.
Ensures correct polarity of AC output cables and final connection, with warnings against misconnection.
Lists essential checks to ensure correct installation and readiness before commissioning the inverter.
Details the correct order for switching on breakers and the inverter for initial operation.
Covers the selection and detailed setup of various inverter operation modes like Grid-tie, Off-Grid.
Details the inverter's display panel and the functions of its four operating buttons.
Lists defined warning situations, their icons, and descriptions for diagnosing issues.
Provides a reference for fault codes, their possible causes, and suggested solutions.
General| Model | Voltronic Power 10KW |
|---|---|
| Power Rating | 10KW |
| Waveform | Pure Sine Wave |
| Storage Temperature | -15°C to 60°C |
| Rated Power | 10KW |
| DC Voltage | 48VDC |
| AC Voltage | 230V |
| Output Frequency | 50/60Hz |
| Battery Voltage | 48V |
| Protection | Overload, Over Temperature, Short Circuit |
| Humidity | 5% to 95% (Non-Condensing) |
| Cooling | Forced Air Cooling |
