35
Controls
This chapter describes the instrument panels sold by Volvo Penta for your engine. If your boat is equipped with
controls which are not described here and you feel uncertain about the function, please contact the dealer you
purchased the boat from.
Disengaging the shift function
The shift function can be disengaged so that the con-
trol lever only affects the engine speed.
1. Move the lever to the neutral position (N)
2. Press the neutral button (N) in and hold it down
while moving the control lever forward to the shift
position (F).
3. Release the neutral button. The green indicator
begins to flash to acknowledge that the shift func-
tion is disengaged.
The lever now only controls engine speed.
When the lever is moved back to the neutral position
it will automatically re-engage. This is confirmed by
the green indication which gives constant light.
WARNING! Take care not to engage the rever-
sing gear/stern drive unintentionally.
Single lever control. Electronic
Operation
Both the shift function and engine speed control are
controlled using the single lever control.
N = Neutral position (reverse/stern drive is disenga-
ged and the engine runs at idle speed).
F = Reversing gear/stern drive engaged for move-
ment ahead.
R = Reversing gear/stern drive engaged for move-
ment astern.
T = Adjustment of engine speed.
NOTE! The engine can only be started if the Control
lever is in the neutral position.
To Next Page
Loading...
