90
In case of emergency
Malfunction message engine and EVC-
system
If the diagnostic function discovers a malfunction, it
warns the driver by showing pop-ups in the tachome-
ter display and the buzzer will sound.
Pop-ups will alternate between “cause of fault” and
“measures to take”.
To acknowledge the alarm, press NAVIGATION
WHEEL. When the fault has been acknowledged, the
buzzer will become silent. Press NAVIGATION WHE-
EL. The pop-up will disappear and normal display
window will be shown.
NOTE! To enable engine start the alarm must be ack-
nowledged.
Danger pop-up
If the Danger pop-up is shown during operation, a
serious fault has occured.
NOTE! Acknowledge the alarm and stop the engine
at once.
Information regarding “cause of fault” and “measures
to take” is found in chapter “Fault register”.
Warning pop-up
If the Waring pop-up is shown during operation, a
fault has occured.
NOTE! Acknowledge the alarm and stop the engine
at once.
Information regarding “cause of fault” and “measures
to take” is found in chapter “Fault register”.
Caution pop-up
If the Caution pop-up is shown during operation, a
fault has occured.
Acknowledge the alarm.
Information regarding “cause of fault” and “measures
to take” is found in chapter “Fault register”.
To Next Page
Loading...
