Installation of the inner belt
1 Unload the automatic tensioner.
2 Install the belts.
3 Release the relief on the automatic belt tensioner.
4 Check that the belt is correctly aligned on all the
pulleys.
Installation of outer belt
1 Install the belts.
2 Tighten the tension roller’s square bunge.
Tightening torque 70 Nm. Keep it there.
3 Tighten the 2 bolts securing the belt tension roller.
Tightening torque 48 Nm.
4 Install the protective cover.
Cooling System
78 47707967 09-2022 © AB VOLVO PENTA
To Next Page
