Drive Belt, Replace
The following steps describe the removal/installation of
belts on an engine with double rive belts.
NOTICE! It is recommended that both belts are always
changed.
IMPORTANT:
Always change a belt that is oily, worn or damaged.
Removal
CAUTION!
Pinch hazard. Keep fingers clear.
1 Remove the protective cover.
2 Undo the bolts securing the outer belt’s tension
roller bracket.
3 Release the belt tension roller.
4 Remove the outer belt.
5 Turn the automatic belt tensioner to unload the
inner belt.
6 Remove the inner belt.
NOTICE! Check the operation of the pulleys/wheels
and their bearings. Replace the component in the
event of play/damage.
Cooling System
47707967 09-2022 © AB VOLVO PENTA 77
To Next Page
