Start/Stop Panel
The start/stop panel is used for starting and stopping
the engine frpm other stations than the main station.
To start the engine it is necessary for the start key at
the main station to be in the ”I” operating position.
Read the starting instructions in chapter Start-
ing page 48 and Engine Shutdown page 55 to
ensure you use the correct start procedure.
Cruise Control
Switch on cruise control by pressing the button.
Make fine adjustments to the locked engine speed by
pressing the + or – buttons to increase or reduce it.
Sport fish panel
Sport fishing
Single lever
Silent idle
For more information regarding these functions, refer
to the Optional page 39 section.
Instruments and Controls
12 47702095 04-2011
To Next Page
Loading...
