13
13. Remove the sump as well as the nut and lock
washer for the camshaft. Use a counterhold on
the crankshaft.
14. Bend down the lock washer and release the bolt
securing the reverse gear flange to the
crankshaft. Use a counterhold. NOTE! Take care
of the key. Lever loose the rubber damper with a
screwdriver.
15. Remove the bolt for the intermediate gear. Dis-
card the sealing washer 1 under the bolt. Pull off
the intermediate gear.
16. Check that the shaft pin 1 for the intermediate
gear is secure.
To Next Page
Loading...
