Volvo Penta TAD1385VE User Manual

Checking the oil with a flexible dipstick
IMPORTANT:
Insert the dipstick in increments of around 200 mm,
without bending the wire, for the entire length of the
plastic tube.
Engine Oil, Replace
WARNING!
Hot oil and hot surfaces can cause burns.
Oil changes must be done when the engine is hot.
1 Connect the drain hose to the oil drain pump and
check that no leakage can occur.
2 Pump the oil out (or remove the bottom drain plug
and drain the oil).
Collect all the old oil and old filters, and hand them
to a re-cycling station for destruction.
3 Remove the drain hose (or install the bottom drain
plug).
4 Fill with engine oil.
For change volume, please refer to Technical
Data, page 73.
P0026405
Maintenance
47713625 06-2021 © AB VOLVO PENTA 55

Volvo Penta TAD1385VE Specifications

General

Engine Model	TAD1385VE
Cooling System	Liquid-cooled
Fuel System	Common rail
Displacement	12.8 liters
Aspiration	Turbocharged
Emission Compliance	EU Stage V
Bore x Stroke	131 mm x 158 mm
Engine Type	In-line 6-cylinder, 4-stroke diesel engine with direct injection