10
Special tools
9996400-9 Impact hammer. Used with 9996419 or
9996657.
9996402-5 Mandrel for installing copper sleeves
9996419-9 Extractor for the steel ring above the
copper sleeve
9996420-7 Mandrel for installing copper sleeves and
steel rings, 7(x) series.
9996421-5 Mandrel for installing copper sleeves and
steel rings, 6(x) series.
9996433-0 Adapter (lid). Used with 6662
9996437-1 Tool for installing the rear crankcase seal
9996643-4 Injector extractor
9996645-9 Cylinder liner extractor. Used with
9996394 and 9992178 or 9996087
9996650-9 End cutter for cleaning the bed for the
copper cylinder (stage 1)
9996651-7 End cutter for cleaning the bed for the
copper cylinder (stage 2)
9996657-4 Extractor for copper cylinder
9996662-4 Pressure test equipment
9996772-1 Tool for checking camshaft wear. Used
with 9989876
9996841-4 Cutting tool for opening up sealant
grooves in cylinder head, 6(x) series*
9996842-2 Cutting tool for opening up sealant
grooves in cylinder head, 7(x) series*
9996847-1 Press tool (2 required). Used for measur-
ing lining collar height above block plane
* 9999745 Repair kit containing a cutter for cutting tools
9996841 and 9996847.
99968429996841
9996400 9996402 9996419 9996420
9996650 9996651 9996657 9996662
9996421 9996433 9996437 9996643
9996847
9996645
To Next Page
Loading...