113
TAMD63L-A, TAMD71B TAMD73P-A,
TAMD63P-A TAMD74C-A,
TAMD74L-A,
TAMD74P-A
Type designation .................................................. – MG507A-1 MG5085A-E*
Gear ratios ............................................................ – 1.51:1; 1.77:1; 1.47:1; 1.72:1;
1.98:1 2.04:1
Angle (output shaft) .............................................. – 7° 7°
Oil capacity, approx. ............................................ – 6.7 liters, 4.4 liters,
(1.8 US gals) (1.2 US gals)
Oil quality (as per API system) .......................... – CC, CD, CE CC, CD, CE
Viscosity at oil temp. of 66–85°C (151–185°F) .. – SAE30** SAE30**
at oil temperature 80–99°C
(176–210°F)......................................... – SAE40** SAE40**
Working oil pressure at oil temperature of 82°C
(180°F):
engaged, 1800 rpm ........................................... – 2.05–2.2 MPa, 2.25 MPa,
(20.9–22.4 kp/cm² = (22.9 kp/cm² =
297–319 psi) 326 psi)
at cruising speed, lowest .................................. – 1.9 MPa (19.3 kp/cm² = –
276 psi)
Approx. weight ...................................................... – 178 kg (392 lbs) 140 kg (309 lbs)
* Reverse gear with electronically operated shifting.
** Note! Only single grade lubricating oil (only one
viscosity number) may be used in the reverse gears.
Type designation .................................................. – – MG5085PL*
Gear ratios ............................................................ – – 1.2:1
Angle (output shaft) .............................................. – – 0°
Oil capacity, approx. ............................................ – – 4.4 liters,
(1.2 US gals)
Oil quality (as per API system) .......................... – – CC, CD, CE
Viscosity at oil temp. of 66–85°C (151–185°F) .. – – SAE30**
at oil temperature 80–99°C
(176–210°F)......................................... – – SAE40**
Working oil pressure at oil temperature of 82°C
(180°F):
engaged, 1800 rpm ........................................... – – 2.25 MPa,
(22.9 kp/cm² =
326 psi)
Approx. weight ...................................................... – – 130 kg (287 lbs)
* Reverse gear with electronically operated shifting.
** Note! Only single grade lubricating oil (only one
viscosity number) may be used in the reverse gears.
7740156 - Downloaded from www.volvopenta.com 22/07/2009 00:44:08