Volvo Penta TAMD74A - Lubricating System Oil Change

32
Maintenance: Lubricating system
SAE5W/30
−−
−−
−30
−−
−−
−20
−−
−−
−10 ±0 +10 20 30 40
−−
−−
−22
−−
−−
−4
++
++
+14 32 50 68 86 104
−−
−−
−15
o
C
SAE15W/40
−−
−−
−25
o
C
SAE10W/30
−−
−−
−10
o
C
SAE20W/30
±0
o
C
SAE30
SAE40
+10
o
C
o
C
o
F
✱✱
✱✱
✱
Lubricating system
Oil change intervals can vary from 25 to 200 hours depending on engine type, grade of lubricant and the sulphur
content in the fuel.
IMPORTANT! Oil change intervals must never exceed 12 months.
If you would like longer oil change intervals than those specified in the table below, samples of the lubricant must
be sent regularly to the oil manufacturer for checking.
Viscosity
Select the viscosity from the table for constant
exterior temperatures.
*Refers to synthetic or semi-synthetic oil
Oil change volume
See “Technical data”
NOTE! Mineral based synthetic or semi-synthetic oil can be used on condition that it meets the oil grades
above.
1)
If the sulphur content in the fuel exceeds 1.0 wt.%, an oil with TBN14–20 must be used (TBN=Total Base Number)
2)
The oil must be changed at least once a year
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d'Automobiles
API = American Petroleum Institute
Oil grade Fuel sulphur content in wt.%
up to 0.5 % 0.5 – 1.0 % above 1.0 %
1)
Oil change interval
2)
VDS, VDS-2 200 hours 100 hours 50 hours
100 hours 50 hours 25 hours
ACEA E3–96, E2–96
API CD, CE, CF, CF–4, CG–4