04 Interior
Electrically operated roof
04
98
Plastic cover for temporary covering
G020802
Clamping of the plastic cover between the
wiper blades and the windscreen
Hook at front wheel housing
Hole in plastic cover for rearview mirror
Hook at rear wheel housing
Hole in plastic cover for antenna
Hooks at rear bumper
If the roof cannot be closed due to low battery
voltage or a possible roof fault then a protective
plastic cover can be fitted. The plastic cover is
fitted with the rope attachments inward.
The plastic cover is stored in a bag marked
"Cover for temporary use".
G020803
Plastic cover, located in the ski hatch.
1. Raise the windows (if possible).
2. Take the plastic cover from the centre
panel in the rear seat backrest at the ski
hatch.
3. Take the plastic cover from the package
and unwrap it.
4. Thread the hole (3) over the door mirror and
secure the hooks (2) in the front wheel
arches.
5. Clamp the plastic cover between the wiper
blades and the windscreen and stretch the
plastic so that it has one tuck (1) per wiper
blade.
6. Guide through the antenna (5).
7. Secure the hooks (4) in the rear wheel
arches and the hooks (6) under the rear
bumper.
To Next Page
Loading...
