General Information
This document describes how Volvo Penta marine
engines equipped with the EMS 2.0 and EMS 2.2 con-
trol system are controlled using the OEM CAN bus
interface.
The intention is to provide vehicle and control module
manufacturers with the information necessary for com-
patibility with the EMS and properly implement data-
link-based vehicle functions.
OEM control system
OEM designed control systems must apply SAE J1939
standards with additional Volvo Penta proprietary mes-
sages.
IMPORTANT!
If non-Volvo Penta equipment is connected to the com-
munication busses, there is always a risk that the
safety of the system is jeopardized.
Related Documents
•
SAE J1939 International automotive guidelines
•
ISO 15765 Diagnostics on Controller Area Networks
2 47706587 05-2015 © AB VOLVO PENTA
To Next Page
Loading...
