Operator safety
WARNING
Risk of fatal accidents.
Unauthorised persons within the work area around
the machine could lead to serious crushing injury.
• Clear all unauthorised personnel from the working
area.
• Keep a lookout in all directions.
• Do not touch control levers or switches during
start.
• Sound the horn before beginning operation.
Always sit in the operator seat with the seat belt
fastened when starting the engine/machine and
when operating controls, e.g. levers and
switches.
Check that the seat belt is not worn, see page
58
.
The machine must be operational, i.e. faults
which can cause accidents must be rectified.
Suitable clothing for safe handling and a hard hat
should be worn.
Keep your hands away from areas where there is
a risk of crushing, e.g. covers, door and window.
Use steps and handholds when entering or
leaving the machine. Use the three-point grip, i.e.
two hands and one foot or two feet and one hand.
Always face the machine – do not jump!
Check that the attachment is properly attached
and locked.
The vibration (shaking) which arises when
operating may be harmful to the operator. Reduce
this by:
- adjusting the seat and tightening the seat belt.
- picking the smoothest operating surface for the
machine (levelling the surface when
necessary).
- adapting your speed.
The cab is designed to meet the requirements for
falling objects, the weight of which agrees with
testing methods according to ROPS-standard
(Roll Over Protective Structure), OPGstandard
70
Operating instructions
Safety rules when operating
To Next Page
Loading...
