Service Information
Document Title: Function Group: Information Type: Date:
Safety when handling the
machine
191 Service Information 2014/5/8 0
Profile:
WLO, L110E [GB]
Safety when handling the machine
Volvo Construction Equipment is only responsible if:
the machine has been used correctly and has been maintained according to recommendations in the service
manuals and the machine's Operator's manual.
prescribed service and inspections have been performed at the specified intervals.
lubricant recommendations in the manual have been followed.
no safety seals have been opened by an unauthorized person.
all modifications and repairs have been performed in the manner prescribed by Volvo.
only genuine Volvo parts/accessories, or attachments that fulfil Volvo's requirements have been used.
WARNING
Machine operators must have sufficient skills and knowledge of the content in the Operator's Manual before
operating the machine.
It is important that the operator reads and follows the instructions in the machine's Operator's Manual.
An untrained operator may cause serious injuries and fatalities.
Never operate a machine for which there is no Operator's Manual available.
Learn to understand the warning plates, symbols and operating instructions for the machine before you start
operating.
A few simple safety rules
General
Repair malfunctions or defects that affect safety as soon as possible.
To Next Page
Loading...
