The cab is installed on rubber pads, is insulated, and has a flat floor with rubber mat.
Tested and approved as a protective cab and meets standards according to ISO
3471-1994 and SAE 1040-MAY 94 (ROPS), ISO 3449-2005 (FOPS).
Number of emergency exits 2 (door and right side window)
Heating and ventilation
The basic version of the loader has a heating and ventilation system with defrosters for
all windows and optimal air distribution (10 vents). Air conditioning is available as optional
equipment.
Operator seat
This machine is equipped with an operator's seat that meets the criteria for EN ISO 7096.
Setting height (quick adjustment) 80 mm (3.15 in)
Setting fore-aft 160 mm (6.3 in)
Setting for operator's weight 40–130 kg (88–287 lbs)
Setting backrest (adjustable back angle) 12°
Upholstery Flameproof
Lap type seat belt with reel Yes
Hand and arm vibrations
The hand and arm vibrations generated during real operating conditions, if the machine
is used as intended, is less than 2.5 m/s
2
RMS (root mean square) acceleration according
to ISO 8041.
Whole-body vibrations
Whole-body vibrations generated during real operating conditions, if the machine is used
as intended, is according to the following table.
Typical operating
conditions
Vibration emission,
value
a
w,eqx
(m/s² RMS)
Vibration emission,
value
a
w,eqx
(m/s² RMS)
Vibration emission,
value
a
w,eqx
(m/s² RMS)
V-shaped loading
and carrying work
0.6 0.6 0.6
Loading and carrying
work
0.5 0.5 0.6
V-shaped loading
and carrying work
with pallet fork
0.5 0.5 0.5
Transporting
operation
0.5 0.5 0.6
294
To Next Page
Loading...
Need help?
General
