10 Maintenance and service
10
351
Lamp replacement - direction
indicators front
The direction indicator lamp is fitted inside
the headlamp's smaller cover.
1. Detach the headlamp (p. 348).
2. Detach the cover by pulling it straight out.
3. Pull the bulb holder in order to extract the
bulb.
4. Press and simultaneously turn the bulb to
detach it.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 353)
Lamp replacement - rear lamp
Rear direction indicators, rear fog lamp and
reversing lamp are replaced from inside the
cargo area.
Lamp housing, rear
The bulbs in the rear light cluster are replaced
from inside the cargo area (not the LED
lamps).
1. Remove the covers in the left/right-hand
panel to access the bulbs. The bulbs are
located in a bulb holder.
2. Press the catches together and pull out
the bulb holder.
3. Remove the blown bulb by pressing it in
and turning anticlockwise.
4. Fit a new bulb, press down and turn
clockwise.
5. Press the bulb holder into place and refit
the cover.
Reversing lamp
1. Open the panel in the boot lid.
2. Detach the bulb holder by turning it anti-
clockwise.
3. Remove the blown bulb by pressing it in
and turning anticlockwise.
4. Fit a new bulb, press down and turn
clockwise.
5. Attach the bulb holder by turning it clock-
wise.
Related information
•
Lamp replacement - location of rear
lamps (p. 352)
•
Lamps - specifications (p. 353)
To Next Page
