Volvo S60 - Wiper Blades

||
10 Maintenance and service
10
354
Lighting
W
A
Type
Brake lights 21 P21W LL
Reversing lamp 21 H21W LL
Rear fog lamp 21 H21W LL
A
Watt
Related information
•
Lamp replacement (p. 347)
•
Lamp replacement - location of rear
lamps (p. 352)
•
Lamp replacement - vanity mirror lighting
(p. 353)
Wiper blades
The windscreen wiper blades must be in serv-
ice position when they are to be replaced.
Service position
Wiper blades in service position.
In order to make replacement possible, to
clean or lift the wiper blades (for scraping off
ice from the windscreen, for example), they
must be in service position.
IMPORTANT
Before placing the wiper blades in the
service position, make sure that they are
not frozen down.
1. Place the remote control key in the igni-
tion lock
11
and briefly press the START/
STOP ENGINE button to set the car's
electrical system to key position I. For
detailed information on key positions, see
Key positions - functions at different lev-
els (p. 67).
2. Briefly press the START/STOP ENGINE
button again to set the car’s electrical
system in key position 0.
3. Within 3 seconds, move the right stalk
switch up and hold it in position for
approx. 1 second.
> The wipers then move to standing
straight up.
The wipers return to their starting position
when you briefly press the START/STOP
ENGINE button to set the car’s electrical sys-
tem to key position I (or when the car is
started).
IMPORTANT
If the wiper arms in service position have
been folded up from the windscreen, they
must be folded back down onto the wind-
screen before the wipers are allowed to
return to their starting position. This is to
avoid scraping the paint on the bonnet.
11
Not necessary in cars with Keyless function.