34
Maintenance schedule
Every 1000 operating hours / at least every 24 months
Valve clearances. Check/Adjust................................................................ not shown
Every 2000 operating hours / at least every 24 months
Injectors. Pressure test..............................................................................not shown
Every 12 months
● Coolant. Change
1)
.........................................................................................page 44
● Seawater pump. Check impeller .....................................................................page 47
● Engine and reverse gear. Clean / Paint ...................................................... not shown
Cooling system. Clean/Check .................................................................... not shown
Boost pressure. Check .............................................................................. not shown
Wastegate valve. Check ............................................................................ not shown
EDC-system. Check with diagnostic tool ................................................... not shown
Engine and reverse gear. General check.................................................... not shown
1)
Applies only to coolant with a rust-protection mixture.
Every 24 months
● Coolant. Change
1)
.................................................................................pages 41–45
1)
Applies only to coolant with an anti-freeze mixture (glykol mixture).
Renovated engine:
After the first 100 operating hours
Valve clearances. Check ........................................................................... not shown