WARNING!
· The jack (see the following pages) must be correctly placed in the jack attachment.
· Be sure the jack is on a firm, level, non-slippery surface.
· Never allow any part of your body to be extended under a car supported by a jack.
· Use the jack intended for the car when replacing a wheel. For any other job, use stands to support
the side of the car being worked on.
· Apply the parking brake and put the gear selector in position P.
· Block the wheels standing on the ground, use rigid wooden blocks or large stones.
· The jack should be kept well-greased.
· Use gloves
pg. 85 Wheel changing
Changing a wheel
· Engage the parking brake.
file:///K|/ownersdocs/2001/2001_SV40/01sv40_06a.htm (3 of 12)12/30/2006 3:49:22 PM
To Next Page
Loading...
