WARNING!
Make sure the jack and spare tire are properly secured in position after use. They must be properly
fastened to help keep them in place in the event of a sudden stop.
NOTE: See
pages 84 for information on how the jack should be used.
pg. 55 Folding rear seats
Folding rear seat
The rear seat is split into two sections so that each section can be folded separately.
· Remove the headrests (see
page 3).
· Put the belts over the upright section of the back rest. The center seatbelt can stay where it is.
· Pull the catch (1) forward and fold the backrest down.
· When returning the backrests to the upright position, make sure that the seatbelts are not caught and
twisted.
Flat load space
· Pull the rear seat cushion up against the front seats.
· Remove the headrests (see page 3).
· Fold the back rest down.
file:///K|/ownersdocs/2001/2001_SV40/01sv40_03c.htm (3 of 9)12/30/2006 3:49:17 PM
To Next Page
Loading...
